Posted in : Other By Petter Vikström Translate with Google ⟶
3 years ago
If you have LACP configured between your Arista-switches (or any other switches) and a Nutanix Cluster, you will run into an issue when using Nutanix Life Cycle Management (LCM).
LCM updates for BIOS, BMC and SATA DOM are currently not supported for Nutanix Clusters that use protocols such as LACP.
If you try to do a full update with LACP active, you will end up with your first node not coming back online and being stuck in maintenance-mode.
The reason behind a node becoming stuck, is because in some of the updates, the nodes boots into the Phoenix ISO and Phoenix does not support LACP at this time.
A work-around is to enable LACP-fallback on your switches. Below is an example with Arista and how quick it is to configure it:
Arista1 > interface port-channel 10 > port-channel lacp fallback static > port-channel lacp fallback timeout 5 > exit Arista2 > interface port-channel 10 > port-channel lacp fallback static > port-channel lacp fallback timeout 5 > exit
You will need to configure LACP-fallback on all port-channels that are connected to your nodes.
When the upgrade is complete, and the node have booted up, LACP PDUs will be sent out.
LACP will automatically be activated on the port-channel again.
If you have any questions, feel free to email me at firstname.lastname@example.org or comment down below.
Tags : Arista, LACP, LACP-fallback, Nutanix
Vi erbjuder personlig rådgivning med författaren för 1400 SEK per timme. Anmäl ditt intresse i här så återkommer vi så snart vi kan.